ct262-microprocessor-systems-engineering-only-scienceprodigy-1

Week 3 Assignment – Voltage Divider Networks           

Voltage Divider Networks

Design three voltage divider networks to achieve the following design criteria.

  • With Vin = 10V, Vout should be within the range of 3.3 and 5V
  • With Vin = 5V and a load of 15kohm as a load connected from Vout to ground, the voltage across the load should be within the range of 2.5V and 3.3V
  • With Vin = 5V and a load of 1kohm, the current through the load should be less than 2mA.

Include the following:

  • Engineering calculations to justify component selection. 
  • Screenshot of the circuit constructed with MultiSIM (or equivalent circuit simulator)
  • Screenshot of the circuit simulation running and the measurements of the required voltages and currents shown on a virtual digital multimeter from MultiSIM as shown in this week’s lecture.

Thanks for installing the Bottom of every post plugin by Corey Salzano. Contact me if you need custom WordPress plugins or website design.